Seite wählen

Planar E and I cores

For the design of SMPS transfomers and chokes where high power and reduced height is necessary, then Planar can be the solution. The favourable surface to volume ratio provides outstanding performance.

Clearly component lifetime and repeatability in manufacture are evident as no windings are in use. These characteristics allow a very flexible and versatile use of the range of Kaschke Planar Cores when constructing SMPS transformers. By choosing the adequate ferrite material you will achieve the optimal solution in the frequency range of 100-1000 kHz.

Materials

For our range of Planar Cores we recommend the Kaschke power ferrite K2010 and K2001. The material K2010 is suitable for a frequency range up to 500 kHz while K2001 is designed for the use above 500 kHz.

Planar E cores can also be supplied with different core heights on request. The following sizes are possible:

Core type Maximum length of leg
PE 18/10/4 6 mm
PE 22/16/6 6 mm
PE 32/20/6 7 mm
PE 38/25/8 7 mm
PE 43/28/10 7 mm
Type nominal AL-values / nH datasheet
K2001 K2010
PE 18/10/4 2500 3500 PDF Icon
PI 18/10/2 2750 3800 PDF Icon
PE 22/16/6 3850 5500 PDF Icon
PI 22/16/2,5 4550 6350 PDF Icon
PE 32/20/6 5000 7150 PDF Icon
PI 32/20/3,2 5850 8350 PDF Icon
PE 38/25/8 5950 8450 PDF Icon
PI 38/25/4 7050 10000 PDF Icon
PE 43/28/10 6000 8550 PDF Icon
PI 43/28/4 7250 10300 PDF Icon

Kaschke Components GmbH • Kaschke Components GmbH • Rudolf-Winkel-Str. 6 • 37079 Göttingen • Telefon +49 551 5058 6 • Telefax +49 551 65756